What Are DIY Plumbing Mistakes That Can Cause Grave Problems To Your Plumbing In Denver?
Plumbing is one of the most essential systems in any home, yet it is also one of the most neglected. When something goes wrong with the plumbing, it can quickly become a nightmare for any homeowner.
Unfortunately, many people attempt to fix plumbing problems themselves, without understanding the potential consequences. This often leads to even bigger problems, and in some cases, can even be dangerous. Here are some DIY plumbing mistakes that you should avoid at all costs:
Not Knowing Where Your Main Water Shut-off Valve Is Located
The first step to taking care of any plumbing problem is to shut off the water supply. However, many people don’t know where their main water shut-off valve is located. This can cause serious problems if a plumbing issue arises and you can’t shut off the water quickly.
Using The Wrong Pipe For The Job
There are different types of pipes that are used for different applications. Using the wrong pipe for the job can cause serious problems, including leaks and bursts. Make sure you know which pipe is right for the job before beginning any repair.
Not Installing A Water Pressure Regulator
If your home has high water pressure, it’s important to install a water pressure regulator. High water pressure puts unnecessary stress on your pipes and can cause them to leak or burst over time. By installing a water pressure regulator, you can help prolong the life of your pipes and prevent costly repairs down the road.
Over-tightening Pipe Fittings And Connections
When connecting pipes or fittings, it’s important not to over-tighten them. This can damage the pipe and cause leaks. Instead, hand-tighten the connection until it’s snug, but don’t overtighten it.
Not Using A Pipe Thread Sealant
When connecting two pieces of pipe, it’s important to use a pipe thread sealant. This will help create a watertight seal and prevent leaks. Make sure to follow the directions on the sealant to ensure proper application.
Not Checking For Leaks After Repairing A Pipe
Once you’ve repaired a pipe, it’s important to check for leaks. The best way to do this is to turn on the water and look for any leaks around the repair. If you see any water leaking, you’ll need to make another repair.
Not Knowing How To Use A Pipe Wrench
Pipe wrenches are one of the most essential tools for any plumber. However, many people don’t know how to use them properly. Using a pipe wrench incorrectly can damage the pipes and cause leaks. Make sure you know how to use a pipe wrench before attempting any repairs.
Not Checking For Corrosion Before Repairing Pipes
Corrosion is one of the leading causes of plumbing problems. If you’re going to be repairing any pipes, it’s important to check for corrosion first. If the pipes are corroded, they’ll need to be replaced instead of repaired.
Not Draining The Pipes Before Repairing Them
If you’re going to be repairing any pipes, it’s important to drain them first. This will allow you to more easily access the pipes and make the repairs. Once the repairs are made, you can then refill the pipes with water.
Attempting to fix plumbing problems yourself can often do more harm than good. If you’re not sure how to properly fix a plumbing issue, it’s best to leave it to the professionals. By avoiding these DIY plumbing mistakes, you can help keep your home’s plumbing system in top shape. For more information, contact Drain Pros Plumbing Denver at (720) 664-8988.